Decoloring agents

Highly effective organic decoloring agent –TJO-101

 

This product has excellent efficiency in decoloring, flocculating and COD removal.

 

Application fields and properties:
1.The product is mainly used to decolor the effluent with high chromaticity.
2.The product is mainly used in the treatment of wastewater from printing & dyeing and coking industry.
3.The rate of decoloring is more than 95% in wastewater treatment, and the rate of COD removal is between 40% and 70%.

 

Specifications

Item 

Ⅰ 

Appearance 

Colorless or light-color sticky liquid 

Solid content (%)≥ 

38.0-50.0

Dynamic Viscosity  mPa·s (20℃)  ≥

20 — 500

PH (25% water solution) 

2.5 — 5.0 

 

Application Method & Notes
1.The product shall be diluted by 10-40 times, and then added to the wastewater directly. After stirring for several minutes, the clear water could be collected by precipitation or air-floatation.
2.The optimized PH of the wastewater is 6-10.
3.It is recommended to use this product together with the inorganic flocculants to reduce the operation cost. The order and proportion of agent dosage depend on the flocculation test and the treating process.
4.The product is nonflammable and unexplosive. The suitable storage temperature is 5-30 and avoid direct sunlight.
5.The substance is slightly irritable to eyes and skin, avoiding eyes and skin contact.
6.The product storage period is 1 year. Layer separation would appear and the product would become white at low temperature. There is no negative impact on the efficiency after mixing up.
7.The product is packed in plastic drums according to the requirements of clients.